Audio Technica ATW 2110BI

$329.00

Audio-Technica’s 2000 Series is a 10-channel frequency-agile UHF wireless system designed to suit a variety of applications, including MI/live performance, fixed installation, public address, A/V rental houses and places of worship. It offers all the advantages of a high-quality, professional wireless system at an extremely affordable price. Features switchable antenna power. Also, the optional ATW-CHG2 two-bay recharging station provides power to recharge NiMH batteries in two ATW-T220a handheld transmitters and/or ATW-T210a body-pack transmitters in any combination.

Offering 10 selectable channels and True Diversity UHF wireless technology, the 2000 Series features automatic frequency scanning. At the touch of a button, this function automatically determines and sets the best available frequency. Any of the 2000 Series’ 10 channels may be used together without any frequency coordination problems or group selection issues. The 2000 Series also incorporates Audio-Technica’s Tone Lock™ squelch plus an easy-to-read LCD information display.

In stock

Description

Operating Frequencies UHF
Band D: 656.125 to 678.500 MHz DISCONTINUED IN NORTH AMERICA

Band I : 487.125 to 506.500 MHz

Number of Channels 10 total
Modulation Mode FM
Maximum Deviation ±40 kHz
Dynamic Range > 110 dB (A-weighted), typical
Total Harmonic Distortion < 1% (at 1 kHz, ±20 kHz deviation)
Operating Range 100 m (300′), typical
Open range environment with no interfering signals.
Operating Temperature Range 5º C to 45º C
41º F to 113º F
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response 100 Hz to 15 kHz (+1 dB, -3 dB)
RECEIVER SPECIFICATIONS
Receiving System True diversity
Image Rejection 60 dB nominal, 55 dB minimum
RF Sensitivity 20 dBuV at 60 dB S/N ratio
(50 ohms termination)
Antenna Input BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements 12-18V DC, 500 mA
Dimensions 210.0 mm (8.27″) W x
162.2 mm (6.39″) D x
44.0 mm (1.73″) H
Not including BNC connectors or feet.
Net Weight 1.0 kg (35.3 oz), without accessories
Accessories Included Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters

ADDITIONAL RECEIVER SPECS

Maximum Output Level:
XLR, balanced: +9 dBV
¼” (6.3 mm), unbalanced: +4 dBV
Balanced Audio Output Attenuator:
Two position switch: 0 / -12 dB

BODY-PACK TRANSMITTER SPECIFICATIONS
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions Following federal and national regulations
Input Connections Four-pin Locking Connector
Pin 1: GND
Pin 2: INST INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +9V
Batteries Two 1.5V AA alkaline (not included)
or two 1.2V AA NiMH (not included)

Recharging power for NiMH batteries (with ATW-CHG2)
U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
Other world areas: 3.2 V DC, 320 mA x2

Battery Life High: 7 hours (alkaline)
Low: 9 hours (alkaline)
Depending on battery type and use pattern.
Dimensions 66.0 mm (2.60″) W x
22.5 mm (0.89″) D x
92.3 mm (3.63″) H
Net Weight 81 g (2.9 oz), without batteries
HANDHELD TRANSMITTER SPECIFICATIONS
RF Power Output High: 30 mW; Low: 10 mW (switchable), at 50 ohms
Spurious Emissions Following federal and national regulations
Microphone Element Dynamic cardioid
Batteries Two 1.5V AA alkaline (not included)
or two 1.2V AA NiMH (not included)

Recharging power for NiMH batteries (with ATW-CHG2)
U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
Other world areas: 3.2 V DC, 320 mA x2

Battery Life High: 7 hours (alkaline)
Low: 9 hours (alkaline)
Depending on battery type and use pattern.
Dimensions 232.0 mm (9.13″) long,
48.0 mm (1.89″) diameter
Net Weight 252 g (8.9 oz), without batteries
Accessory Included AT8456a Quiet-Flex™ stand clamp

Additional information

Weight 1.5 kg
Dimensions 40 × 40 × 10 cm

Reviews

There are no reviews yet.

Be the first to review “Audio Technica ATW 2110BI”