You are here: Home › Products › Effects › Brands › JHS Pedals › JHS Panther Cub V2

JHS Panther Cub V2

$319.00

DELAY

DISCONTINUED AS OF MAY 2021

In 2011, we released the Panther Analog Delay. Almost exactly two years later in 2013, we tried a nearly impossible feat of taking everything we love about the Panther Delay, making a few improvements, and packaging it into an enclosure half the size. Today in 2018 we’re repeating the feat and making the Panther Cub V2 half the size once again!

WHAT’S NEW ON THE V2?

– Half the size of the Panther Cub V1 and Panther Cub V1.5
– Fully Wet Mix now available
– Gain Control to set overall volume
– Even smoother oscillation and run-away
– Active EQ, which functions at a Tilt style EQ

100% ANALOG BUCKET BRIGADE TECHNOLOGY

The Panther Cub V2 is voiced to deliver the dark and chewy repeats that analog delay fans clamor for. The Panther Cub offers you 1,000ms (one full second) of delay time! Bring in beautiful, ambient modulation with the pedal’s modulation controls.

– 1,000ms of Delay (1 full second)
– Four 3205 Bucket Brigade Delay chips
– Onboard Modulation that stays accurate even when using Tap Tempo

EXTENSIVE ONBOARD CONTROL

Thanks to its groundbreaking feature set, the Panther Cub Delay has been one of our most intriguing pedals to date. It’s not often you find an all-analog delay with onboard tap tempo and a 4-section RATIO control with settings for quarter, dotted-eighth, eighth, and triplet divisions. In fact, our original Panther Delay was the first to do it in 2011!

– Soft-touch Tap Tempo switch
– 4-position RATIO control (1/4, 1/8, dotted 1/8, Triplets)
– True Speed LED (indicates rate of actual delay)

EXTERNAL TONE-SHAPING POWER

The Panther Cub’s control and tweakability extend further than what you’ll find onboard.  An expression pedal input can be assigned to change many of the pedal’s settings on the fly. And you even have the opportunity to externally control your tap tempo and tap slave the Panther Cub to your other time-based pedals.

– Dry Out (via TRS splitter) for stereo field of sound
– Assignable Expression (control Time, Ratio, Modulation)
– Tap Input/Output allows external tap controller or tap slaving

ADDITIONAL PANTHER CUB BENEFITS:

– Even smaller Pedalboard-friendly size
– Space-saving top-mounted Input/Output jacks
– True Bypass Switching
– Standard 9V DC negative power

THIS PEDAL REQUIRES STANDARD 9V DC NEGATIVE POWER, CONSUMES 67MA, AND MEASURES 2.2″X4.8″X1.6″.

In stock

Categories: ,

Description

CONTROLS
TIME – Controls the delay time up to 1000ms. Left is shorter, right is longer.
VOLUME – Controls overall gain of dry and wet sounds. As you turn up the Mix, the dry signal will decrease. You can use the Volume
control to compensate or boost the overall signal.
MIX – Controls volume of the delay repeats only. Left is less, right is more.
RATIO – Controls the tap subdivision: Quarter, dotted-eighth, eighth, and triplet note divisions. The setting of the Ratio control
applies constantly, whether using tap tempo or when manually adjusting the Time knob.
F.BACK – Controls the amount of delay repeats. The Panther Cub V2 has an improved feedback for smooth, infinite repeats or wild
oscillation noises.
EQ – Active EQ tilt control. Noon is “flat”. Turning the knob above noon boosts highs and cuts lows, while turning the knob below
noon boosts lows and cuts highs. Because the Panther Cub V2 is all analog, the overall tone of the repeats is dark even when set at
noon.
JACKS
INPUT – 1/4” jack on the top right receives your instrument’s signal.
OUTPUT – 1/4” jack on the top left sends the signal out of the pedal to an amplifier or pedal chain.
TAP/EXP – 1/4” jack on the right side of the pedal. In Expression Mode, connect any TRS expression pedal to control Time, Ratio, or
Mod Speed. To program, follow the directions below. In Tap Mode, you can set the speed using an external tap tempo pedal. Choose
which one you want by the TAP/EXP switch on the inside of the pedal.
SWITCHES
BYPASS – Left footswitch turns the pedal on and off.
TAP TEMPO – Right footswitch taps in the speed of the delay.
MOD ON/OFF – Turns the modulation on or off for the repeats only.
MOD SPEED +/- – Selects between faster or slower modulation speeds.
INTERNAL TAP/EXP SWITCH – Switch on the inside of the pedal let’s you choose between tap or expression mode for the TAP/
EXP jack.
PROGRAM MODE
With the Panther Cub V2 you have the ability to control Time, Ratio, or Mod Speed with a TRS expression pedal. To select which
parameter to control, hold down the Tap Tempo switch until the tempo LED stops blinking. Once it stops blinking, you are in program
mode. Select which parameter to control by either turning the Time or Ratio knob or by switching the Mod Speed switch one time.
Once you have done this, tap the Tap Tempo switch again and you will exit program mode. You will now be able to control the
parameter you selected with your expression pedal.
POWER – Uses 9V DC negative center power. Do not use more than 9V DC. Your warranty will be voided

Additional information

Weight 4 lbs
Dimensions 12 × 6 × 6 in

Reviews

There are no reviews yet.

Be the first to review “JHS Panther Cub V2”

Related products